1/8 inch aluminum adapter place to bolt an Axial standard 3 gear trans to the Capra skid. Designed to work with the Vader Product Flat skid. Can fit with a dig attached as well.
Please note that to use with the stock skid it will need the optional spacer under it due to the angle of the skid.
To use the vp dig, you have to use the lower hole on the rear upper and trim the inner ear.
It will only use 3 screws in to hold the transmission in. This is because of the link positioning there is no way to add the 4th screw.
You get the aluminum adapter plate only.
We do offer a 3d printed skid on our other site that can accomplish this. spare-timehobbies.com
